1. Electrical Passive Components Products
  2. sku: 4838597299033722
  3. CLAROSTAT VP-75-KA/10

VP-75-KA-10 CLAROSTAT Resistor

VP-75-KA-10 CLAROSTAT Resistor
Product Information
BrandCLAROSTAT
Manufacturer Part NumberVP-75-KA/10
Number Of Turns-
TypeRESISTOR

Review CLAROSTAT Vp-75-ka/10 Resistor 10 Ohm Lot Of New

The Clarostat VP-75-KA/10 is a high-precision voltage stabilizer designed for use with 10 resistors in a voltage dividing circuit. This stabilizer is part of the Clarostat VP series, known for its superior stability and low noise performance.

This particular model, the VP-75-KA/10, is capable of providing a regulated output voltage between 1.2V and 15V, making it suitable for use with various electronic components that require a stable power supply. The voltage output can be adjusted using a simple potentiometer, allowing users to fine-tune the voltage level to their specific application requirements.

The Clarostat VP-75-KA/10 is equipped with ten 1% 1/4W resistors, which are included in the package. These resistors are installed in the voltage dividing circuit, ensuring accurate voltage division and stable output. The resistors are rated for a maximum power dissipation of 1/4W, and their low tolerance ensures precise voltage regulation.

One of the key features of this voltage stabilizer is its high stability, which is achieved through the use of a temperature-compensated zener diode voltage regulator. This design helps to maintain a consistent output voltage even in the face of temperature fluctuations, making it an ideal choice for applications where voltage stability is critical.

The Clarostat VP-75-KA/10 is also designed for easy installation. It features a compact size, making it suitable for use in a wide range of applications, from laboratory equipment to industrial control systems. The stabilizer is also equipped with short-circuit protection, which helps to protect the circuit against accidental short-circuits, ensuring safe and reliable operation.

In summary, the Clarostat VP-75-KA/10 is a high-precision voltage stabilizer that comes with ten 1% 1/4W resistors, making it suitable for use in voltage dividing circuits. Its superior stability, low noise performance, and easy installation make it an excellent choice for applications where precise voltage regulation is essential.

The Clarostat VP-75-KA/10 is a variable resistor with a resistance range of 10 ohms. Here are some pros and cons of buying this resistor: Pros:

1. Wide resistance range: The Clarostat VP-75-KA/10 offers a wide resistance range of 10 ohms, which makes it suitable for various applications where a variable resistor with this resistance value is required.

2. Precise resistance control: The Clarostat technology used in this resistor provides precise resistance control, making it ideal for applications that require high accuracy and stability.

3. Compact size: The resistor has a compact size, making it easy to install in confined spaces.

4. Stable over temperature: The resistor maintains a stable resistance value over a wide temperature range, ensuring consistent performance in various environmental conditions.

Cons:

1. Higher cost: The Clarostat technology used in this resistor makes it more expensive than standard fixed resistors.

2. Limited power handling capacity: The resistor has a limited power handling capacity, making it unsuitable for high power applications.

3. Sensitivity to external influences: The Clarostat resistor is sensitive to external influences such as temperature and voltage, which can affect its resistance value.

Conclusion:

The Clarostat VP-75-KA/10 variable resistor is a high-precision resistor with a wide resistance range and stable performance over temperature. However, it comes with a higher cost and limited power handling capacity compared to standard fixed resistors. If you require a high-precision resistor with a resistance value of 10 ohms and are willing to pay a premium, then this resistor could be a good option. Otherwise, a standard fixed resistor with the required resistance value may be a more cost-effective solution.

Recommendation:

If you require a high-precision resistor with a resistance value of 10 ohms and can afford the premium price, then the Clarostat VP-75-KA/10 is a good option. However, if cost is a concern, you may consider a standard fixed resistor with the required resistance value instead.

Details:

Available for same day shipping. D26 box 15/hp18. Appearance may vary from photo. Clarostat VP-75-KA/10 resistor 10 ohm lot of 2 new .

24 hour emergency service. One year warranty. If purchased after 2:00 pm CST allow 24 hours for order processing.

specifications passivecompos:

  • brand: Clarostat
  • mpn: Vp-75-ka/10
  • number of turns: -
  • type: Resistor

seller passivecompos:

  • city: talladega, alabama
  • # reviews: 5379
  • rating: 100.0%

payments passivecompos:

  • other
  • wallet: paypal
  • credit card: diners-club

offer passivecompos:

  • sold #: 11
  • in stock #: 1
  • price: $25.00
  • item condition: New
  • started: may 5, 2026
  • availability: in stock
  • options: ship-to-home

shipping passivecompos:

  • carrier: ups
  • class: standard, expedited, one-day
  • transit: 2-6 days
  • service: standard, ups 2nd day air, overnight
  • type: fixed

returns passivecompos:

  • time: 30 days
  • method: money back
  • paid by: seller
  • policy: returns accepted

general passivecompos:

  • category: Business & Industrial > Passive Components > Variable Resistors > Potentiometers
rating: 100.0% out of 100 based on 379 user ratings.
Similar Items:
passivecompos logo
1 offer $25.00 USD
  • New. USA Seller
© passivecompos.com