NH2501K000FE01 VISHAY DALE Inductive Wirewound Resistor

Review VISHAY DALE 1.0k Ohm Non-inductive Wirewound 1% 250w Resistor

The Vishay Dale NH2501K000FE01 NH-250 0k is a non-inductive wirewound resistor that delivers a power rating of 250 watts. This high-performance resistor is manufactured by Vishay Dale, a reputable name in the electronics industry known for its reliable and high-quality components.

The NH2501K000FE01 is a wirewound resistor, which means it uses a coil of fine wire wrapped around a non-conductive core. This design provides excellent heat dissipation, ensuring the resistor can handle high power levels without overheating. The wire used in this resistor is made of high-temperature alloys, such as nickel-chromium or copper-nickel, to further enhance its thermal performance.

The resistance value of this resistor is 0k ohms, which means it has a very high resistance. This makes it ideal for applications that require current limiting, voltage dividing, or power dissipation, without significantly affecting the circuit's output.

The NH2501K000FE01 is a non-inductive resistor, which means it has a low inductance. This is important in high-frequency applications, as inductance can introduce unwanted phase shifts and distortion. By using a non-inductive design, this resistor ensures clean signals and accurate performance in high-speed circuits.

The resistor is RoHS compliant, meaning it does not contain hazardous substances such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), or polybrominated diphenyl ethers (PBDE). This makes it environmentally friendly and suitable for use in a wide range of applications, including industrial, automotive, and consumer electronics.

The NH2501K000FE01 is available in a 1-inch diameter, 2-inch length cylindrical case with a flange. The case is made of high-quality ceramic material, which ensures excellent mechanical strength and high thermal conductivity. The flange provides a convenient mounting surface, making it easy to integrate the resistor into various circuit designs.

In summary, the Vishay Dale NH2501K000FE01 NH-250 0k is a high-power, non-inductive wirewound resistor with a 0k ohm resistance value. It is designed for high-performance applications that require excellent heat dissipation and low inductance. The resistor's RoHS compliance and flanged cylindrical case make it a versatile and reliable component for various electronic designs.

1. High Power Rating: The resistor has a power rating of 250W, making it suitable for high power applications.

2. Non-inductive: The resistor is non-inductive, which means it does not have a self-inductance, reducing the risk of voltage spikes and noise.

3. Wirewound Construction: The resistor is made with wirewound construction, which provides excellent thermal stability and high power dissipation.

4. Precision Tolerance: The resistor is available in a precision tolerance of 0.1%, ensuring high accuracy and consistency in electrical resistance.

1. Size and Weight: Due to its high power rating, the resistor is larger and heavier than smaller resistance values, which may make it difficult to incorporate into some applications.

2. Cost: The resistor is more expensive than lower power rating resistors due to its high power and precision specifications.

3. Limited Availability: The resistor may not be readily available in some regions or from all suppliers, which could result in longer lead times or higher shipping costs.

Conclusion: The Vishay Dale NH2501K000FE01 NH-250 0k non-inductive wirewound 250W resistor is an excellent choice for high power applications that require high precision and stability. Its non-inductive design and wirewound construction make it ideal for applications where voltage spikes and noise are a concern. However, its larger size and weight, as well as its higher cost, may make it less suitable for applications with limited space or budget constraints.

Recommendation: If you require a high power, precision resistor for your application, the Vishay Dale NH2501K000FE01 NH-250 0k non-inductive wirewound 250W resistor is a good choice. However, it is important to consider the size and weight limitations of your application, as well as the budget, before making a final decision. Consider shopping around for the best price and availability to ensure that you get the best value for your investment.

Details:

Dale Vishay NH2501K000FE01 non-inductive wirewound 1.0k ohm, 250 w, 1% tolerance power resistor in an aluminum finned housing. See attached picture for full product specifications.

specifications passivecompos:

• brand: Vishay Dale
• mpn: Nh2501k000fe01
• power rating: 250 W
• type: Power Wirewound Resistor
• termination style: Stud Threaded
• resistance rating: 1.0 K
• maximum operating temperature: 250 C
• material: Aluminum
• minimum operating temperature: 55 C

offer passivecompos:

• prices: $18.99–$29.99
• item condition:
  • New
  • New – Open box
• started: april 24, 2024
• options: ship-to-home
• sold #: 39
• in stock #: 5
• availability: in stock

returns passivecompos:

• policy: no returns

general passivecompos:

• category: Business & Industrial > Electronic Semiconductors > Passive Components > Fixed Resistors

seller passivecompos:

• rating: 100.0%
• city: west jordan, utah
• # reviews: 370

payments passivecompos:

• wallet: google-pay
• credit card: american-express

shipping passivecompos:

• transit: 6-10 days
• type: calculated
• carrier: usps
• class: standard
• service: usps ground advantage