MT40 OHMITE Rheostat Train Control Amp Power

Review OHMITE Model 40 Ohm 1.5power Rheostat Train Speed Control

Introducing the Ohmite Mt40 MT-40 40 1.5Power Rheostat, a versatile and efficient train control device designed for applications requiring precise resistance adjustment and current limiting. This rheostat, with a model number Mt40 MT-40, is specifically rated for a resistance range of 40 ohms and can handle a maximum power of 1.5 amps.

The Mt40 MT-40 40 1.5Power Rheostat is constructed from high-quality materials, ensuring durability and reliability even under heavy use. Its compact design, measuring approximately 3 inches in length, 1.5 inches in width, and 1 inch in height, makes it an ideal fit for various model train applications or other similar control applications.

One of the primary features of this rheostat is its ability to provide resistance control, allowing you to adjust the resistance value to fine-tune the power delivered to your model train or other electrical load. The resistance can be adjusted smoothly and accurately through a knob, which is easily accessible on the device's top surface.

Moreover, this rheostat acts as a current limiter, ensuring the current flowing through the circuit stays below a safe level. Protecting your device and ensuring it operates effectively and efficiently is essential. With a maximum current rating of 1.5 amps, it is suitable for devices that require a reasonable current limit to operate safely.

The Mt40 MT-40 40 1.5Power Rheostat comes with a known minimum resistance of 40 ohms and is supplied with a 6-foot-long, 16-gauge wire lead. It can be easily installed in various control panel setups and features a removable front panel cover for easy access during adjustment.

This rheostat operates on DC voltage with a recommended input voltage range of 4V to 18V. It is suitable for model train sets, layouts, and other applications that require precise resistance control and current limiting. With its robust design, adjustable resistance, and current limiting capabilities, the Ohmite Mt40 MT-40 40 1.5Power Rheostat is an indispensable tool for model train enthusiasts, electricians, and engineers involved in studying electrical circuits.

Ohmite Mt40 (MT-40, 40 ohm, 1.5A Power Rheostat) is a type of variable resistor primarily used for train control in model railroading applications. Here are some pros and cons that could help in deciding whether to buy this device:

1. Adjustable Resistance: The ohmite Mt40 allows you to adjust the resistance value in real-time, which is an essential feature for train control systems.

2. Safe Operating Voltage: It can handle a maximum voltage of 36VDC, suitable for model railroad power supplies.

3. Robust Construction: Its rugged design ensures durability, making it suitable for frequent use.

4. Easy to Install: This rheostat has simple installation requirements and doesn't need advanced setup procedures.

5. Versatile: The Ohmite Mt40 can be used in various train control applications such as voltage control, current limiting, and speed control.

1. Manual Control: As it is a manual rheostat, the resistance value must be adjusted manually, which may not be suitable for automated or remote control systems.

2. Heat Generation: The Mt40 can generate heat when used in high load conditions, which may impact performance and possibly require frequent cooling.

3. Lack of Protection: It does not come with any built-in over-current or over-voltage protection, which could lead to damage if not handled properly.

4. Limited Current Capacity: With a maximum current capacity of only 1.5A, it may not be capable of managing powerful locomotives or heavy loads.

5. Linear Control: The resistance value changes linearly with the knob position, which could impact the accuracy of speed control.

The Ohmite Mt40 (MT-40, 40 ohm, 1.5A Power Rheostat) is a valuable component for model railroading applications due to its adjustability, robust construction, and easy installation. However, it may not be suitable for automated or remote control systems, high load conditions, or heavy current requirements. Additionally, users should be careful with heat generation and lack of built-in protection. Overall, it is an excellent choice for basic train control applications where manual adjustments and a reasonable power capacity are sufficient.

Details:

Experience precise control over your model trains speed with the Ohmite MT-40 model j power rheostat. This power rheostat is no exception, providing you with the precision and reliability required for your model train speed control needs. The knob may not be original. The rheostat is rated at 1.5 amps, 40 ohms and clean in good condition.

For sale is an Ohmite MT40 power rheostat with knob. Feel free to ask any questions.

specifications passivecompos:

• brand: Ohmite
• mpn: Mt40
• part type: Control
• termination style: Soldering
• country/region of manufacture: United States

general passivecompos:

• category: Business & Industrial > Passive Components > Variable Resistors > Potentiometers

payments passivecompos:

• other
• wallet: paypal
• credit card: diners-club

seller passivecompos:

• # reviews: 1339
• city: southampton, pennsylvania
• rating: 97.3%

offer passivecompos:

• availability: in stock
• in stock #: 5
• sold #: 20
• best offers: true
• started: january 5, 2025
• options: ship-to-home
• prices: $17.95–$74.99
• item condition:
  • Used
  • New
  • New: Other (See Details)
  • New – Open box

shipping passivecompos:

• service: usps ground advantage
• transit: 5-9 days
• class: standard
• type: calculated
• carrier: usps

returns passivecompos:

• policy: no returns