IM36-11EX-U-24VDC TURCK Potentiometer Amplifier Supply

Review TURCK Im36-11ex-u/24vdc Potentiometer Amplifier 19-29vdc Supply Output

The Turck IM36-11EX-U/24VDC is a versatile potentiometer amplifier designed for converting 0-10V signals from a linear potentiometer into a 4-20mA output signal. This amplifier is an essential component for various process control applications where accurate measurement and transmission of process values are crucial.

The IM36-11EX-U is built to operate with a wide input voltage range of 19-29VDC, making it suitable for use in industrial environments with varying power supplies. The amplifier itself is powered by a steady 24VDC supply.

This potentiometer amplifier features a high-precision design, ensuring accurate and reliable conversion of the input voltage to the output current. It is equipped with a linear output stage that delivers a stable 4-20mA output signal with minimal distortion.

The IM36-11EX-U is designed for use with 0-10V signals from a linear potentiometer. It has a high input impedance, which ensures minimal load on the potentiometer, preserving the accuracy of the measurement. The amplifier is also equipped with a shunt resistance of 100 ohms, enabling the measurement of low currents.

The device is built with robust components and is designed for industrial use. It is housed in a compact, rugged enclosure that is resistant to dust and water (IP65). The amplifier also features a high operating temperature range of -40 C to 70 C, making it suitable for use in extreme temperatures.

The Turck IM36-11EX-U/24VDC potentiometer amplifier is an ideal solution for applications requiring the conversion of 0-10V signals to 4-20mA output signals. Its wide input voltage range, high precision, and rugged design make it a reliable choice for industrial process control applications.

The Turck IM36-11EX-U/24VDC potentiometer amplifier is a 0-10V output device designed for converting a 0-10V input signal from a linear or rotary potentiometer into a proportional current or voltage output. Below are some pros and cons that may help in your decision-making process.

1. Wide input voltage range: The device can accept an input voltage of 19-29VDC, providing greater flexibility in power supply selection.

2. High output accuracy: The IM36-11EX-U features a high output accuracy of /- 0.5%, ensuring precise control over the output signal.

3. Wide output current range: The amplifier can supply an output current of up to 5A, making it suitable for various applications that require high power outputs.

4. Robust design: The device is designed for industrial applications, featuring a rugged housing and a wide operating temperature range (-40 C to 85 C).

5. Easy installation: The device comes with pre-wired terminals and a clear marking of input and output connections, simplifying the installation process.

1. Limited input resistance: The device has a maximum input resistance of 100kOhms, which may not be suitable for certain applications.

2. Relatively high power consumption: The IM36-11EX-U draws approximately 0.35A at a 24VDC input voltage, which could result in additional power costs.

3. Limited input signal types: The device is designed specifically for 0-10V input signals from linear or rotary potentiometers.

4. No built-in overcurrent protection: While the device can supply up to 5A of output current, it does not have any built-in overcurrent protection.

The Turck IM36-11EX-U/24VDC potentiometer amplifier is a robust and accurate device suitable for various industrial applications where precise control over current or voltage outputs is required. Its wide input voltage range, high output accuracy, and wide output current range set it apart from other similar devices in the market. However, its limited input resistance, relatively high power consumption, and lack of built-in overcurrent protection are potential drawbacks. Ultimately, the decision to purchase this device will depend on the specific requirements of your application and whether the pros outweigh the cons for your particular use case.

If you require a precise and robust 0-10V output device for industrial applications and are not concerned about the limitations mentioned above, the Turck IM36-11EX-U/24VDC potentiometer amplifier is an excellent choice. However, if you have unique requirements, such as higher input resistance or overcurrent protection, you may want to consider alternative devices that better meet your needs.

Details:

Specifications: model #: IM36-11EX-U/24vdc. Mounting: din rail or panel. Nominal voltage : 24vdc. This is a surplus item.

Address, next day automation, 9472 hemlock lane n. Output rating: 0-10V.

specifications passivecompos:

• brand: Turck
• mpn: Im36-11ex-u/24vdc
• part type: Amplifier Supply

general passivecompos:

• category: Business & Industrial > Passive Components > Variable Resistors > Potentiometers

shipping passivecompos:

• type: calculated
• service: usps first class, usps priority mail padded flat rate envelope, ups next day air
• transit: 3-8 days
• class: standard, expedited, one-day
• carrier: usps, ups

payments passivecompos:

• wallet: apple-pay
• other
• cash
• credit card: mastercard

returns passivecompos:

• paid by: seller
• time: 30 days
• method: money back
• policy: returns accepted

seller passivecompos:

• city: osseo, minnesota
• # reviews: 39632
• rating: 100.0%

offer passivecompos:

• best offers: true
• in stock #: 5
• options: ship-to-home
• availability: in stock
• sold #: 26
• prices: $127.88–$865.21
• item condition:
  • New – Open box
  • New
  • Gebraucht
  • Used
• started: july 23, 2025