CLAROSTAT-A47-7500-S CLAROSTAT Linear Potentiometer Element

Review CLAROSTAT A47-7500-s 1/2w 7.5k Ohm Linear Potentiometer Element No Shaft

The Clarostat Clarostat-A47-7500-S A47-7500-S 1/2W 7.5k Linear Potentiometer is an electro-mechanical component specifically designed for precision voltage or current division applications. With a 7.5kOhm resistance value, it provides stable and accurate output over a wide operating temperature range. The linear taper design ensures a consistent resistance change as the shaft is rotated, making it suitable for various control systems and laboratory equipment.

This potentiometer features a 1/2 watt power rating, which signifies its ability to handle a moderate power load without overheating or losing accuracy. Its shaft is designed with a diameter of 6mm and a length of 45mm, providing enough clearance for integration in various control systems. The decisive 0.1% total tolerance affirms the potentiometer's commitment to maintaining a high degree of accuracy in its resistance value.

The Clarostat-A47-7500-S Linear Potentiometer comes with a full epoxy coating and a detented version of the shaft, offering additional protection against external factors such as dust, moisture, and accidental knocks. The detented design ensures positive stops, which can be beneficial in applications that require repeatable settings or precise adjustments.

Lastly, it is important to note that this potentiometer operates on a DC voltage and requires a minimum voltage of 1.5V to function effectively. With its durable construction and dependable performance, the Clarostat-A47-7500-S 1/2W 7.5k Linear Potentiometer is a reliable choice for those seeking both precision and durability in their laboratory or control system applications.

The Clarostat A47-7500-S linear potentiometer is a 1/2w, 7.5k Ohm element with a shaft. Here are some pros and cons that might help you make a decision about whether or not to buy this potentiometer:

1. Linear characteristics: The Clarostat A47-7500-S is a linear potentiometer, meaning its resistance changes evenly and consistently as the shaft is rotated. This is useful in many applications where precise and stable voltage or current control is required.

2. High resistance value: With a resistance of 7.5k Ohms, this potentiometer offers a high degree of voltage or current attenuation or division. This can be beneficial in applications where precise voltage or current matching is important.

3. Durable construction: This potentiometer features a stainless steel shaft and a foam-backed, Teflon-coated PTFE body, making it suitable for use in harsh environments where industrial or chemical exposure may be a concern.

1. Limited power handling: With a power rating of only 1/2 watt, this potentiometer may not be suitable for applications with high power requirements. To ensure reliable operation, it's important to stay within the specified power rating.

2. Limited adjustment range: This potentiometer offers a maximum adjustment range of approximately 270 degrees, which may not be sufficient for some applications that require a wider range of adjustment.

3. Higher cost: Compared to lower-end potentiometers, the Clarostat A47-7500-S may be more expensive due to its high resistance value, linear characteristics, and durability.

In conclusion, the Clarostat A47-7500-S may be a suitable choice for applications that require a stable, linear voltage or current control with a high resistance value and the ability to withstand harsh environments. However, it may not be the best option for applications with high power requirements or that require a wider range of adjustment, and it may come at a higher cost compared to lower-end potentiometers.

Based on the given specifications, the Clarostat A47-7500-S is recommended for applications that require precise, stable voltage or current control, with a focus on durability and the ability to operate in harsh environments, and where a 7.5k Ohm resistance value is sufficient. If these requirements do not apply, or if other factors such as power handling and adjustment range are more important, a different potentiometer may be a better fit for your needs.

Details:

This potentiometer has a linear taper, thick film conductive plastic element. Resistance range linear taper: 7.5k 7500 ohm. Clarostat a47-7500-s, 1/2 watt 7.5k ohm linear taper, thick film conductive plastic potentiometer element shaft not included. Specifications: electrical.

This element accepts any of the pick-a-shaft inserts insert not included. Resistance tolerance: 10%. Power rating: 1/2 watt 70 c dratted to watts 105.

specifications passivecompos:

• brand: Clarostat
• mpn: Clarostat-a47-7500-s
• part type: Linear Shaft

returns passivecompos:

• time: 30 days
• paid by: buyer
• method: money back
• policy: returns accepted

general passivecompos:

• category: Business & Industrial > Passive Components > Variable Resistors > Potentiometers

payments passivecompos:

• wallet: paypal
• other
• credit card: mastercard

offer passivecompos:

• price: $14.95
• item condition: New
• sold #: 35
• availability: in stock
• started: january 31, 2025
• in stock #: 2
• options: ship-to-home

shipping passivecompos:

• service: usps ground advantage, usps priority mail
• transit: 5-11 days
• type: fixed
• class: standard, expedited
• carrier: usps

seller passivecompos:

• # reviews: 41934
• rating: 99.6%
• city: costa mesa, california